The making of collection frames
Below you can follow how the frames with the chips was made step by step.
 A 5mm non corrosive carbon impregnated conductive polyurethane (anti static) foam is glued to an 3mm acid free cardboard. |
 A self adhesive photo paper is attached to the anti static foam. |
 Fixing the photo paper without getting any bubbles. |
 The Photo paper attached on the foam. |
 Carefully cutting out the place for the chips without damaging the anti static foam. |
 Mounting the chips. |
 All chips mounted and ready to be inserted into the frame. |
 The final frame. |
Email address:
